Not a member yet?Register here in seconds!

Maximum Protection Dental Guard

Protect your teeth from night-time teeth grinding (Bruxism).

Sleep better knowing your teeth are protected with DenTek's Maximum Protection Dental Guard.

Reduce damage to teeth and prevent noise associated with teeth grinding.

An over the counter dental guard with a forming tray that creates a fit similar to professionally made dental guards, but without the expense.


Features:

  • Forming Tray: Keeps the mouldable material where it needs to be for proper alignment. Ensures the best retention and most comfort. Designed to comfortably align with your natural bite.
  • Dental Guard: BPA-free thermoplastic. Soft mouldable upper layer made from EVA that creates a cushion of comfort between the teeth. Strong bottom layer made from EMA provides a grind shield for  protection.
  • Non-bulky design.
  • Tray Handle: Forming tray handle makes removing guard from hot water easier and less messy.
  • Storage Case: Hinged storage case protects the guard while not in use.
  • BPA & Latex free
  • How to use Dental Night Guards
  • How to use Dental Night Guards

Instructions for Use


Fitting Instructions:

What You Need To Begin:

  • Bowl of room temperature water
  • Metal Fork
  • Mirror
  • Microwave or stove
  • Microwaveable bowl or stove pot
  • Timer

 

Step 1: Test Fitting

  • The dental guard must be loaded into the forming tray.
  • The dental guard is positioned correctly when the top of the dental guard is concave.
  • If it is not in the right position, correct the placement of the dental guard before going any further in the fitting process.
  • Start by placing the dental guard and forming tray below your upper teeth and bite down.
  • Look in a mirror to make sure the forming tray is centred in the middle of your front two teeth.
  • Your teeth should be aligned in the middle of the mouldable material.

 

Step 2: Final Fitting

  • Using a microwave or stove, bring a bowl or pot of water to a rolling boil.
  • Water should be at least 1.5 inches deep.
  • Remove the boiling water from heat source and let it rest for 10 seconds.
  • Use caution when removing from heat.
  • Place the dental guard while loaded in the forming tray face down in the hot water for 60 seconds.
  • Remove the dental guard and forming tray with a metal fork, using the openings in the tray handle.
  • Quickly dip it in room temperature water (no more than 1 second).
  • Immediately pick up the dental guard by the forming tray handle and carefully place in your mouth.
  • Do not bite down yet.
  • While looking in a mirror, centre the dental guard below your front two teeth and the sides below your molars.
  • Firmly bite down into the mouldable material of the dental guard and hold until it cools to body temperature.
  • Wait at least 2 minutes.
  • Gently remove the dental guard and forming tray from your mouth and rinse under cool water for 20 seconds.
  • This allows the moulded dental guard to completely set in the forming tray.
    Once cool, remove the dental guard from the forming tray.
  • Start by gently pulling the ends from each side of the forming tray, then working around to the front. It is normal for the dental guard to slightly stick in the forming tray.
  • Your dental guard is now ready for use.


Cleaning and Care

  • After each use, brush your dental guard with toothpaste and/or mouthwash.
  • Thoroughly rinse with cool running tap water.
  • Never use hot water as it could alter the shape of your dental guard.
  • Replace your Maximum Protection Dental Guard when it has worn through.
  • Check your dental guard monthly for wear.
  • The life of your dental guard depends on how often you grind and the force of your teeth grinding.
  • Your dental guard can last up to six months.
  • If you need assistance, email us at DenTek@QP-Services.com and one of our trained team members will help you.
v>

Reset password

Enter your Email Address: *